The JM-VL02 is a purpose-built, Plaspy compatible GPS tracker designed for industrial and commercial vehicle fleets. Built around an IoT-grade LTE Cat-M1 / NB2 radio with GSM 2G fallback, the JM-VL02 delivers resilient, real-time tracking and vehicle-state telemetry for rental agencies, public transport, construction machinery and broad fleet management deployments.
The device integrates vehicle-focused I/O — ACC/ignition detection, an in-cabin SOS/panic button, relay-controlled remote cut-off and multiple digital inputs and outputs — so operators using Plaspy can combine position data with ignition state, alarms and immobilizer control for anti-theft measures, driver authentication and operational telematics.
Key Highlights
- Plaspy compatible GPS tracker for real-time tracking and centralized fleet management.
- LTE Cat-M1 / NB2 cellular with GSM 2G fallback to maximize coverage and connection continuity.
- Accurate GNSS positioning (GPS + LBS) with better than 2.5 m CEP and fast TTFF for responsive location updates.
- Vehicle inputs and outputs including ACC/ignition detection, SOS button and relay output to support immobilizer/remote cut-off.
- Onboard accelerometer for driving behavior telemetry: harsh acceleration, braking, cornering and collision detection alerts.
- Compact, rugged form factor with IP65 protection for industrial vehicle use (construction, rental fleets, public transport).
- Expandable with optional peripherals: fuel level sensors, temperature probes and RFID readers for driver ID and fuel monitoring.
How It Works with Plaspy
When integrated with Plaspy, the JM-VL02 supplies continuous location and vehicle-state data so fleet managers get actionable, near real-time insights. Plaspy ingests GNSS position, cellular-derived LBS, telemetry and event data from the tracker, enabling live maps, event alerts and historical reports that support dispatch, safety monitoring and loss prevention.
- Real-time location and telemetry updates — tracked via GPS + LBS and delivered over LTE Cat-M1 / NB2 or GSM fallback.
- ACC/ignition status and door/auxiliary input events for accurate asset-on/asset-off reporting.
- Fuel monitoring capability when connected to optional fuel sensors, enabling fuel consumption reporting and anomaly detection.
- Remote immobilizer/relay control — operators can initiate a power cut-off via Plaspy to assist anti-theft and fleet control workflows.
- SOS/panic button and accelerometer-based collision or harsh-driving alerts routed through Plaspy for emergency and safety response.
Technical Overview
| Connectivity | LTE Cat-M1 & NB2 IoT module with GSM 2G fallback |
|---|---|
| Bands / Carrier | Carrier-certified for major networks (PTCRB, AT&T, T-Mobile, Verizon). Specific band support varies by model/region. |
| Power & Battery | 9–36 V DC input for vehicle installation; 300 mAh industrial Li-Polymer backup battery |
| Interfaces | Digital inputs (ACC/ignition, SOS, general input), digital outputs (relay/output) to support immobilization and accessory control; multiple I/O for peripherals |
| GNSS | GPS + LBS positioning; accuracy better than 2.5 m CEP; sensitivity -165 dBm; TTFF: hot ≤1 s, cold ≤32 s |
| Storage & SIM | Standard SIM slot; 32 + 32 Mb onboard data storage; status LEDs for GNSS (blue), Cellular (green) and Power (red) |
| Sensors & Alerts | Onboard accelerometer for harsh-driving and collision detection; supports geo-fence, over-speed, abnormal vibration and power-disconnect alerts |
| Form Factor & Durability | Dimensions 105.5 × 57.0 × 21.8 mm; weight 104 g; IP65 dust/water resistance; CE, FCC and major carrier certifications |
Use Cases
- Fleet anti-theft and immobilization — remote relay cut-off and real-time tracking for rapid recovery and theft mitigation.
- Construction equipment and heavy machinery monitoring — rugged IP65 design and telematics for remote sites.
- Public transport oversight — live vehicle positions, driver behavior monitoring and SOS event handling for safety and compliance.
- Rental and leasing asset control — ignition and RFID integration for driver authentication, usage tracking and billing reconciliation.
- Fuel monitoring and telemetry — connect optional fuel sensors to detect consumption trends and fuel-loss events.
Why Choose This Tracker with Plaspy
The JM-VL02 pairs industrial-grade hardware with the Plaspy platform to deliver reliable, scalable fleet management. Its multi-mode cellular design (LTE Cat-M1 / NB2 with 2G fallback) and carrier certifications reduce connectivity risk across coverage zones, while robust GNSS performance and a fast TTFF keep location reporting accurate and timely. Integrated vehicle I/O and a relay output make the unit ideal for anti-theft workflows — the tracker supports remote immobilizer actions and ignition-aware reporting, enabling Plaspy users to combine location, telemetry and control in a single service.
For organizations that need resilient telematics, accurate GPS tracking, fuel monitoring capability and event-driven alerts, the JM-VL02 offers a compact, service-ready solution that integrates smoothly with Plaspy for centralized dispatch, reporting and over-the-air fleet operations.
Set Up JM-VL02
To set the tracker send the following commands by SMS messages
- Reset factory settings
FACTORY# - Set the time zone UTC-0
GMT,E,0# - Set the operator APN
APN,{{apn}},{{apnu}},{{apnp}}# - Set the GPRS server
SERVER,1,d.plaspy.com,8888,0#
or
xnTl0LN7SXIJIOA10MznLJJjAOUjOf - Set the update interval every 60 seconds
TIMER,60#
or
bslo1DnYjAnM - Enable GPRS mode
GPRSON,1#
To check parameter settings GPRSSET#