The Mini Wire GPS Tracker G23 is a compact, Plaspy compatible GPS tracker engineered for discreet vehicle installation and reliable real-time tracking. Built for cars, motorcycles, e-bikes and light commercial vehicles, the G23 provides hybrid positioning (GPS + BeiDou + LBS) with positioning accuracy of around 5 meters. Its slim form factor and internal antennas make it ideal for fleet management and anti-theft applications where a low-profile tracker is required.
Designed with practical vehicle telemetry in mind, the G23 supports ignition (ACC) detection, remote power/fuel cut (usable as an immobilizer function), power-off alarm, overspeed and vibration/movement alerts. With wide DC input (9–95V), low sleep current and an 80 mAh backup polymer battery for offline alerts, the G23 delivers dependable uptime and rapid integration with Plaspy for reporting, alerts and centralized fleet control.
Key Highlights
- Plaspy compatible for centralized, real-time GPS tracker monitoring and fleet management.
- Accurate hybrid positioning (GPS + BeiDou + LBS) with approximately 5 m accuracy for precise location and route playback.
- Essential anti-theft and immobilizer capabilities via remote power/fuel cut and power-off alarm.
- Wide DC input (9–95V) to support cars, trucks, motorcycles and e-bikes without additional converters.
- Low power design with sleep current around 5–15 mA (12V) and an 80 mAh backup battery to report offline events.
- Vehicle telemetry inputs: ACC ignition detection, overspeed, vibration and illegal ACC/engine alerts for comprehensive event tracking.
- Compact, discreet ABS housing (77 × 28 × 15 mm) that simplifies hidden installations and theft prevention.
How It Works with Plaspy
The G23 transmits location and event telemetry to Plaspy using its 2G GSM link. Once connected, Plaspy ingests GNSS positions, status markers and alarm events to provide real-time tracking, historical playback, geofence alerts and fleet reporting. Integration is straightforward: Plaspy receives standard location reports and event codes from the G23 and maps them to dashboards, notifications and automation workflows used in fleet management and anti-theft monitoring.
- Real-time location and telemetry updates (GNSS + LBS) forwarded to Plaspy for live maps and reports.
- Ignition (ACC) detection and illegal ACC/engine alerts to monitor unauthorized starts and driver behavior.
- Remote power/fuel cut for immobilizer-style intervention controlled via Plaspy when permitted by installation and local regulations.
- Power-off alarm and backup battery notifications allow Plaspy to flag tampering or vehicle power loss events.
- Overspeed, vibration and movement alarms feed into Plaspy rules for alerts, driver coaching and safety workflows.
- Works alongside Plaspy’s broader ecosystem — while G23 does not include Bluetooth sensors, Plaspy can integrate BLE accessories and third-party sensors within the platform to expand telemetry when additional hardware is used.
Technical Overview
| Connectivity | GSM (MT6261D module, 2G) |
|---|---|
| Bands | 850 / 900 / 1800 / 1900 MHz |
| Power & Battery | DC 9V–95V input; working current 30–60 mA (12V); sleep current ~5–15 mA (12V) |
| Backup Battery | 80 mAh, 3.7V polymer (supports offline alerts) |
| Interfaces | 1 low-level output (power/fuel cut), 1 H-IN (ACC detection), 1 UART-TTL (3.3V) for configuration |
| GNSS | ZKMicro AT6558D (GPS + BeiDou + LBS), sensitivity −162 dBm, cold start ~32 s, hot start ~1 s, ~5 m accuracy |
| SIM & Antenna | Micro SIM slot; internal GPS and GSM antennas |
| Bluetooth | Not included in device (no BLE module) |
| Remote Management | Device configuration via 3.3V UART-TTL serial port; no FOTA or web management specified |
| Form Factor | Compact mini wire tracker, ABS housing, 77 × 28 × 15 mm; weight 32 g |
| Environmentals | Operating −30°C to 75°C; storage −30°C to 80°C; humidity 5%–95% |
Use Cases
- Fleet management: monitor vehicle locations, driver behavior and overspeed events for taxis, rental fleets and delivery vehicles.
- Anti-theft & immobilization: discreet installation with remote power/fuel cut gives operators a tool to stop unauthorized vehicle use.
- Motorcycle and e-bike tracking: compact size and wide voltage range suit two-wheel applications where space is limited.
- Passenger cars and light trucks: ACC detection, power-off alarms and low-power standby preserve battery life while maintaining vigilance.
- Telematics for mixed fleets: the G23’s broad input voltage and reliable GNSS/GSM performance make it suitable across diverse vehicle types.
Why Choose This Tracker with Plaspy
When paired with Plaspy, the Mini Wire GPS Tracker G23 becomes a dependable node in a scalable telemetry and fleet management system. Its precise GNSS positioning, essential vehicle inputs (ignition detection, power/fuel cut) and low-power design provide the practical feature set most fleets and rental operators require. Plaspy converts the G23’s location and alarm data into actionable insights — real-time tracking, anti-theft alerts, fuel cut/immobilizer control and historical reports — enabling faster response to incidents and better operational visibility.
Choose the G23 with Plaspy if you need a discreet, cost-effective GPS tracker that balances compact installation with robust telemetry. The device’s broad voltage tolerance, internal antennas and backup battery support dependable field operation, while Plaspy’s platform adds the dashboards, notifications and integrations that make GPS tracking useful for fleet management, anti-theft protection and ongoing vehicle telemetry.
Set Up G23
Use with a tracker
-
Set the Operator APN
CountryCarrierAPNinternet.comcel.com.coUserCOMCELWEBPasswordCOMCELWEB
- Check your tracker clock setup is set UTC-0 or GMT. (The most trackers come from the factory on UTC.)
- For most devices you should use IMEI (International Mobile Equipment Identity) number as unique identifier. However, some devices have vendor specific unique identifier, for example TK-103 devices use 11-digit identifier.
-
Set Up the IP and port on your tracker: (automatic detect tracker's protocol.)
IP 54.85.159.138 Port 8888 - Add on your Account on devices with the IMEI or unique ID.