Huabao - HB-A3B

The HB-A3B 00 Speed Limiter and Governor is a vehicle-grade GPS tracker and control unit designed for Plaspy-compatible deployments where enforced speed control, compliance logging, and real-time tracking matter. Combining GPS/BDS positioning with GSM communications and local control outputs, the HB-A3B 00 enables fleet managers and regulators to monitor location, detect overspeed events, and apply fuel-cut or speed-limiting actions through relay or drive-by-wire (DBW) interfaces.

Built for commercial fleets, passenger transport and mandated government installations, the HB-A3B 00 pairs telemetry and anti-theft alarms with robust trip recording for auditing. When integrated with Plaspy, the device supplies the platform with real-time tracking, event alerts, and buffered data from communication blind zones — supporting safer operations and clearer compliance reporting without changing existing vehicle architectures.

Key Highlights

• Plaspy compatible real-time tracking and telemetry: GPS/BDS position updates and event reporting for continuous fleet management.
• Integrated speed limiting and governor modes: Supports GPS speed or vehicle pulse speed with configurable thresholds and audible warning before limiting.
• Active control outputs for immobilizer-like functionality: Relay or mechanical valve control to cut fuel/power or limit speed when required.
• Comprehensive event detection: ACC (ignition) status, overspeed, power-cut, GPS antenna cut and SOS alarm inputs for anti-theft and safety workflows.
• On-device trip logging and offline buffering: NAND flash stores up to 72 hours of 5s-interval driving records and up to 10,000 records for communications blind zones.
• Optional fuel monitoring and trip printing: Support for optional fuel sensor and printer for fuel monitoring and hard-copy trip logs.
• Vehicle-grade hardware: Wide input voltage (9–36V), wide temperature tolerance, compact form factor and IP43 protection level.

How It Works with Plaspy

When installed in a vehicle, the HB-A3B 00 collects GNSS position fixes, vehicle pulse or GPS speed, ignition state (ACC), and alarm inputs. It transmits location and event data over cellular networks and buffers records locally during signal outages. Plaspy ingests that telemetry to provide real-time tracking, dashboards, automated alerts, and compliance reports.

• Real-time location and telemetry updates delivered to Plaspy for map-based tracking and historical playback.
• ACC/ignition status monitoring to correlate driving time, on/off events and driver behavior.
• Overspeed, SOS, GPS antenna cut and power-cut alarms appear as immediate alerts in Plaspy for rapid response.
• Fuel monitoring data (when an optional fuel sensor is fitted) can be reported to Plaspy for consumption analysis and theft detection.
• Speed limiting and fuel-cut actions are implemented by the HB-A3B 00 via relay or mechanical valve control; when paired with Plaspy’s command and workflow tools, fleets can coordinate remote enforcement and recovery procedures.
• Buffered storage (NAND flash) ensures that Plaspy receives consistent trip data after vehicles return to coverage, supporting complete audit records.

Technical Overview

Use Cases

• Fleet management and speed governance: Enforce company speed policies and create auditable incident records for buses, coaches and commercial trucks.
• Government-regulated vehicle installations: Meet mandated speed-limiter requirements for public service fleets where controlled speed enforcement is required.
• Rental, logistics and long-haul operations: Reduce overspeed risk, log trips for billing/audit, and retain data from remote areas via onboard buffering.
• Anti-theft and recovery workflows: SOS input and power-cut/antenna-cut alarms support rapid alerting and coordinated immobilizer actions to limit unauthorized movement.
• Fuel monitoring and operational cost control: Add the optional fuel sensor to feed consumption telemetry to Plaspy for theft detection and efficiency programs.

Why Choose This Tracker with Plaspy

Choosing the HB-A3B 00 for a Plaspy-compatible deployment brings a proven combination of real-time tracking, durable vehicle interfaces, and active speed-limiting capability. The device is built to capture telematics and safety events that matter — ACC/ignition status, overspeed incidents, SOS and antenna or power tampering — and to store records reliably in communications blind zones. For fleet managers focused on compliance, safety and operational visibility, pairing HB-A3B 00 with Plaspy delivers centralized dashboards, automated alerts, and a clear audit trail for enforcement.

HB-A3B 00 supports core fleet management needs — real-time tracking, telemetry, fuel monitoring (with the optional sensor), and ignition/immobilizer-style control via relay or mechanical valve actuation. Installers can collect trip data locally using USB or integrate the unit with Plaspy to scale monitoring across a mixed vehicle fleet. If you require Bluetooth sensors specifically, Plaspy also supports BLE accessories in broader solutions, though BLE is not specified for the HB-A3B 00 itself.