The HB-A5M is a compact, low-cost 4G GPS tracker engineered for simple installation and reliable daily use in private cars, motorcycles, and light commercial vehicles. Plaspy compatible out of the box, HB-A5M delivers real-time tracking, ignition-aware telemetry, and essential anti-theft tools so fleets and individual owners can monitor location, battery health, and security events from a single platform.
Designed for broad vehicle compatibility with a wide 7–90V operating range and low power consumption, the HB-A5M combines GPS/BDS positioning with 2G/4G cellular connectivity, a small standby battery, and IP54 protection. When paired with Plaspy, this GPS tracker turns raw location and event data into actionable fleet management, anti-theft, and driver behavior insights.
Key Highlights
- Plaspy compatible GPS tracker for real-time tracking and location history across cars and motorcycles.
- Dual-network support (2G and 4G LTE) for wider coverage and resilient telemetry transmission.
- Ignition detection (ACC) plus relay-based remote immobilizer/power cut-off for effective anti-theft response.
- Low-power design with 80 mAh backup battery offering about 30 minutes standby during power loss.
- Wide input voltage (7–90V) and compact form factor for flexible vehicle installations.
- IP54 enclosure for basic protection against dust and splashes in everyday use.
- Remote configuration via SMS and OTA updates for easy field maintenance and remote management.
How It Works with Plaspy
Connecting HB-A5M to Plaspy enables continuous, platform-level tracking, alerting, and reporting. The device streams GPS/BDS location and status messages over cellular networks; Plaspy ingests these messages to provide live maps, telemetry dashboards, scheduled reports, and alarm workflows. Plaspy handles geofencing, event rules, and history playback while the tracker supplies ignition, voltage, and relay-control capabilities to trigger automated responses.
- Real-time location and telemetry updates ingested by Plaspy for live maps and route replay.
- Ignition (ACC) detection for trip segmentation, driver behavior analysis, and idle reporting.
- Remote immobilizer/power cut-off via relay to stop vehicles when authorized through Plaspy.
- Power-off, device removal, over-speed, and low battery/vehicle voltage alarms forwarded to Plaspy alerts.
- Blind-area data storage on the unit and multi-geofence support for reliable logging in coverage gaps.
- Platform-level integration with Bluetooth sensors is possible through Plaspy to enrich telemetry (note: HB-A5M does not include onboard Bluetooth; sensor data would be combined at the platform level).
Technical Overview
| Connectivity | 2G GSM (900/1800 MHz), 4G LTE (FDD/TDD) |
|---|---|
| Bands | LTE TDD: B34/B38/B39/B40/B41; LTE FDD: B1/B3/B5/B8; 2G GSM: 900/1800 MHz |
| Power & Battery | Operating voltage 7–90V; built-in backup battery 80 mAh (~30 minutes standby); typical working current ~60 mA |
| Interfaces | 1 × ACC detection input, 1 × relay output (remote fuel/power cut-off), 1 × serial port for configuration, 1 × SIM card slot |
| GNSS | GPS + BDS positioning; capture sensitivity -148 dBm; track sensitivity -162 dBm; cold start ~32 seconds |
| Bluetooth | No built-in Bluetooth; platform-level integration possible via Plaspy for external Bluetooth sensor data |
| Remote Management | Remote configuration via SMS; OTA (over-the-air) firmware updates supported |
| Form Factor & Durability | Dimensions approx. 79.5 × 44 × 15 mm; weight ~45 g; IP54 enclosure; operating temperature -30°C to +70°C (storage -40°C to +85°C) |
Use Cases
- Private car and motorcycle tracking — discreet installation and consistent GPS tracking for personal vehicles.
- Basic fleet management — monitor vehicle location, ignition events, and over-speed alerts for small fleets.
- Anti-theft and remote immobilization — use relay-controlled fuel/power cut-off to immobilize a vehicle when needed.
- Battery and voltage monitoring — report vehicle battery status and low-voltage events to reduce roadside failures.
- Driver behavior and compliance — ACC-based trip segmentation supports mileage, idle, and trip reporting for driver oversight.
Why Choose This Tracker with Plaspy
When you need an affordable, Plaspy compatible GPS tracker that balances simplicity and practical telemetry, the HB-A5M is a dependable choice. It delivers real-time tracking, ignition-aware data, and a relay-based immobilizer in a compact package that fits cars and motorcycles. The wide input voltage range and low standby draw reduce installation constraints and operating costs across mixed fleets. With OTA updates and SMS configuration, the device is easy to maintain in the field, while IP54 protection and a small backup battery improve resiliency in everyday conditions.
Paired with Plaspy, HB-A5M extends beyond raw GPS data into actionable fleet management: geofencing alerts, telemetry dashboards, anti-theft workflows, and integrated reporting. Whether your priority is anti-theft response, basic fleet management, telemetry-driven maintenance, or straightforward real-time tracking, this tracker offers a cost-effective, scalable component that integrates cleanly into the Plaspy ecosystem.
Set Up HB-A5M
Use with a tracker
-
Set the Operator APN
CountryCarrierAPNinternet.comcel.com.coUserCOMCELWEBPasswordCOMCELWEB
- Check your tracker clock setup is set UTC-0 or GMT. (The most trackers come from the factory on UTC.)
- For most devices you should use IMEI (International Mobile Equipment Identity) number as unique identifier. However, some devices have vendor specific unique identifier, for example TK-103 devices use 11-digit identifier.
-
Set Up the IP and port on your tracker: (automatic detect tracker's protocol.)
IP 54.85.159.138 Port 8888 - Add on your Account on devices with the IMEI or unique ID.