The QuecLink GL52SP is a Sigfox Mini Standby Asset Tracker designed for asset monitoring applications. With its ultra-thin and mini size design, it is perfect for stationary asset monitoring, inventory control, and other tracking management applications that require a small size and long battery life. The GL52SP boasts an impressive standby time of over four years, ensuring that you can track your assets without worrying about frequent battery replacements.
One of the standout features of the GL52SP is its support for GNSS positioning, which allows for accurate tracking and monitoring of assets. It also has the highest Sigfox certificate, Class 0, ensuring better network connectivity, mobility, and a higher success rate when receiving information and data. Additionally, the GL52SP is resistant to existing jamming techniques, providing reliable and secure tracking capabilities.
The GL52SP operates on the Sigfox network, which offers lower network costs in low data usage applications. It supports multiple regions, including Europe, Middle East, Africa, Brazil, Canada, Mexico, Puerto Rico, the United States, Latin America, Asia Pacific, and Russia. With its compact size, long battery life, and reliable tracking capabilities, the GL52SP is an ideal choice for asset monitoring applications.
Key Features:
- Sigfox tracking device supporting GNSS positioning
- Over 4-year standby time
- Mini size ultra-thin design
- Resistant to existing jamming techniques
- Ideal for asset monitoring applications
Technical Specifications:
Sigfox Specifications | |
---|---|
Supported Region | RC1: Europe, Overseas France, Middle East and Africa RC2: Brazil, Canada, Mexico, Puerto Rico, USA RC4: Latin America, Asia Pacific RC7: Russia |
RF Frequency | RC1: Tx: 868.13MHz, Rx: 869.525MHz RC2: Tx: 902.2MHz, Rx: 905.2MHz RC4: Tx: 920.8MHz, Rx: 922.3MHz RC7: Tx: 868.8MHz, Rx: 869.1MHz |
Transmit Output Power | RC1: 13.5dBm ("15" setting) RC2: 22.5dBm ("24" setting) RC4: 22.5dBm ("24" setting) RC7: 13.5dBm ("15" setting) |
Receiver Sensitivity | RC1: -127dBm (600bps, GFSK) RC2: -129dBm (600bps, GFSK) RC4: -129dBm (600bps, GFSK) RC7: -127dBm (600bps, GFSK) |
Frequency Error Tolerance | ±2.5ppm (25°C) |
Receiver Spurious Emission | -54dBm (30MHz~12.75GHz) |
GNSS Specifications | |
GNSS Type | u-blox All-in-One GNSS receiver |
Sensitivity | Autonomous: -147 dBm Hot start: -156 dBm Reacquisition: -160 dBm Tracking: -162 dBm |
Position Accuracy (CEP) | Autonomous: < 2.5m |
TTFF (Open Sky) | Cold start: 27s average Warm start: 27s average Hot start: 1s average |
General Specifications | |
Dimensions | 89.8 × 44 × 10.5mm (3.54’’(L) × 1.73’’(W) × 0.41’’(H)) |
Weight | 48g (1.69oz) |
Backup Battery | Lithium manganese dioxide battery, 2400 mAh |
Standby Time (BLE off, Motion Sensor off) | 1 Report/Day: 1750 Days 1 Report/6 Hours: 540 Days |
Operating Temperature | -20°C ~ +60°C |
BLE Support | BLE 5.0 |
Interfaces | |
Sigfox Antenna | Internal only |
GNSS Antenna | Internal only |
BLE Antenna | Internal only |
LED Indicator | Power on |
Air Interface Protocol | |
Command Set | @Track Air Interface Lite Protocol |
Transmit Protocol | Sigfox Protocol |
Working Modes | Continuous mode, for emergency tracking Power saving mode, for long standby time |
Scheduled Timing Report | Position and status reports at preset intervals |
Motion Detection | Motion alarm based on internal 3-axis accelerometer |
Wakeup Report | Wake up at preset intervals |
Set Up GL52SP
To set the tracker send the following commands by SMS messages, the sample setup the device password is y46HwNh0, this password is the default
-
Restore factory settings
AT+GTRTO=y46HwNh0,4,,,,,,FFFF$ -
Set the time zone UTC-0
AT+GTTMA=y46HwNh0,+,0,0,0,,,,,,FFFF$ -
Set the operator APN
AT+GTBSI=y46HwNh0,{{apn}},{{apnu}},{{apnp}},,,,,FFFF$ -
Set the GPRS server
AT+GTSRI=y46HwNh0,4,,1,d.plaspy.com,8888,54.85.159.138,8888,,0,0,0,,,,FFFF$ -
Set the update interval 60 seconds.
AT+GTFRI=y46HwNh0,1,1,0,0,,,60,60,60,60,7F,40,0,,,FFFF$ -
Enable SOS button notification input 2
AT+GTSOS=y46HwNh0,2,2,,0,0,0,0,0,0,,,FFFF$