Loading...

QuecLink - GV57MG

GV57MG

Queclink GV57MG

The Queclink GV57MG is a compact, IP67 waterproof GPS tracker engineered for light-duty vehicle and motorcycle tracking. Built for harsh outdoor conditions, the GV57MG combines robust GNSS performance, low-power design and BLE 5.1 support to deliver reliable, Plaspy compatible real-time tracking and telemetry for fleet management, anti-theft and recovery applications.

Designed for straightforward installation and lifecycle management, the GV57MG supports LTE Cat M1 and NB2 with GSM fallback, buffered message transmission, and over-the-air configuration. Integrating the GV57MG with Plaspy gives dispatchers and fleet managers live location, alarm routing and historical reports — ideal when you need dependable positioning, ignition awareness and remote control capability in a compact package.

Key Highlights

  • Plaspy compatible GPS tracker with LTE Cat M1 / NB2 cellular connectivity and GSM fallback for wide coverage and lower power.
  • IP67 waterproof, rugged enclosure tailored for motorcycles, light vehicles and exposed equipment.
  • High-sensitivity MTK GNSS receiver (autonomous -148 dBm; hot start -163 dBm; tracking -165 dBm) and position accuracy under 2.5 m CEP.
  • Low-power operation with Queclink’s zero power consumption technology to avoid vehicle battery drain during long-term parking.
  • Bluetooth Low Energy (BLE 5.1) for local sensor integration, beacons and short-range telemetry.
  • Buffered telemetry (up to 10,000 messages) and multi-protocol uplink (TCP, UDP, SMS) for resilient reporting.
  • Simple five-wire installation, ignition detection, SOS alarm and an open-drain output for remote control or immobilizer integration.

How It Works with Plaspy

When paired with Plaspy, the GV57MG streams GNSS location, telemetry and alarm events in real time so fleet managers can monitor routes, detect theft attempts and trigger automated workflows. Plaspy ingests position, status and sensor data from the device using TCP/UDP/SMS protocols and stores buffered messages sent after connectivity restoration. The combination provides actionable geofencing, alerts and historical playback for operational and security use cases.

  • Real-time location and telemetry updates delivered to Plaspy for map visualization and reporting.
  • Ignition detection (positive trigger) and virtual ignition detection (voltage/accelerometer) reported as status events.
  • Alarm events: SOS/panic, speed/tow, parking and geofence breaches (up to 20 internal regions) sent to Plaspy for immediate notification.
  • Remote immobilizer/control: open-drain digital output can be controlled via Plaspy’s output commands to integrate with immobilizer or remote control circuits.
  • Bluetooth sensors/beacons: BLE 5.1 enables local sensor telemetry (e.g., temperature or proximity beacons) to be forwarded to Plaspy when in range.

Technical Overview

ConnectivityLTE Cat M1, NB2 with GSM fallback (multi-mode operation)
BandsBroad range of LTE Cat M1 / NB2 bands supported; GSM fallback bands (specific bandsets vary by variant and region)
Power & BatteryInput 8V–32V DC; internal 190 mAh Li-Polymer backup battery; standby examples: ~40 hours without reporting, ~30–36 hours with periodic reporting (varies by interval)
InterfacesFive-wire in-line connector; one positive trigger input (ignition detection), one negative trigger input, one open-drain digital output (up to 150 mA); micro USB for firmware and debugging
GNSSBuilt-in MTK GNSS receiver — sensitivity: autonomous -148 dBm, hot start -163 dBm, tracking -165 dBm; position accuracy <2.5 m CEP; TTFF cold ~24 s, hot ~1 s
BluetoothBLE 5.1 for local device interactions and sensor integration
Remote ManagementRemote configuration and firmware upgrades (OTA control of digital outputs, encrypted configuration tamper protection); micro USB port for upgrades/debug
Form FactorCompact, rugged IP67 waterproof enclosure for vehicle and motorcycle installation

Use Cases

  • Stolen vehicle recovery and anti-theft — covert installation, jamming detection and remote output control for immobilization workflows via Plaspy.
  • Motorcycle monitoring — waterproof form factor, BLE sensor pairing and low-power zero-consumption mode for long unattended parking.
  • Light fleet tracking — real-time GPS tracker for delivery vans and service vehicles with ignition-aware reporting and harsh-driving alerts for safety coaching.
  • Unattended parking and storage — extended standby times and power-saving design minimize battery drain for long-term parked vehicles.
  • Local telemetry and sensor monitoring — BLE sensors paired to report temperature, proximity or other short-range telemetry through Plaspy when in range.

Why Choose This Tracker with Plaspy

The GV57MG delivers a balanced mix of ruggedness, efficient power management and modern connectivity that fits Plaspy-driven deployments. Its IP67 housing and compact footprint make it straightforward to install on motorcycles and light vehicles, while the MTK GNSS engine keeps position accuracy tight for reliable routing and recovery. Queclink’s zero power consumption technology reduces battery drain risk, which is critical for long-term parking and anti-theft use. Buffered messaging, multi-protocol support and OTA management simplify lifecycle operations and help ensure data continuity for fleet management, telemetry and security workflows.

Certified for multiple carriers and regions (including FCC, PTCRB, AT&T, T-Mobile, CE, Anatel), the GV57MG is a Plaspy compatible GPS tracker designed to integrate quickly into existing telematics stacks. Use it where accurate GNSS positioning, BLE sensor support, ignition awareness and a compact waterproof design are priorities — from stolen vehicle recovery to everyday fleet optimization.

Set Up GV57MG

Country
Carrier
APN
internet.comcel.com.co
User
COMCELWEB
Password
COMCELWEB

To set the tracker send the following commands by SMS messages, the sample setup the device password is yXJ7hPos, this password is the default

  1. Restore factory settings
    AT+GTRTO=yXJ7hPos,4,,,,,,FFFF$
  2. Set the time zone UTC-0
    AT+GTTMA=yXJ7hPos,+,0,0,0,,,,,,FFFF$
  3. Set the operator APN
    AT+GTBSI=yXJ7hPos,{{apn}},{{apnu}},{{apnp}},,,,,FFFF$
  4. Set the GPRS server
    AT+GTSRI=yXJ7hPos,4,,1,d.plaspy.com,8888,54.85.159.138,8888,,0,0,0,,,,FFFF$
  5. Set the update interval 60 seconds.
    AT+GTFRI=yXJ7hPos,1,1,0,0,,,60,60,60,60,7F,40,0,,,FFFF$
  6. Enable SOS button notification input 2
    AT+GTSOS=yXJ7hPos,2,2,,0,0,0,0,0,0,,,FFFF$